Heat output is how much heat is generated per produced MW. Determines when the core starts to heat up and how much energy can be used at once.
#Pulsar lost colony exosuit Offline
A higher maximum temperature allows easier heat control for the engineer.ĭetermines how long in seconds that the core is offline for when it overheats while the Core Safety is enabled. Maximum temperature before core overheats. after ejecting a critically unstable reactor) only gives a 20% increase in power, and has no downsides as this applies the overclock bonus to the auxiliary reactor instead. Overclocking without a main reactor (e.g. Coolant usage is highly suggested while Overclocking is in use. When the Overclock option on the reactor screen is selected the reactor gains 70% more potential output, however it comes at the cost of 20% more reactor heat gained and 90% less passive heat loss. The core will recover from overheating by itself when heat is under maximum temperature, restoring core stability.
While overheated the core emits radiation, damaging all personnel inside Engineering who are not wearing an Exosuit. Once the reactor stability reaches zero the core must be ejected to prevent the ship from blowing up. This allows the core to overheat at the cost of reactor stability. This can be prevented if the core safety lever is toggled off. If the temperature reaches the maximum, the reactor automatically shuts down, leaving the ship without power for some time (determined by the emergency cooldown stat) while the reactor cools. a: 0 for Off, 2 for Low, and 4 for High.Coolant can be used to control the cooling of the reactor. When the total usage is more than 50% of the reactor's output, the reactor will heat up faster depending on how much over 50% of the total usage is. If the total usage is less than half of the output, the reactor cools down, and it will cool down faster depending on how low the usage is. Heat changes depending on the total usage of a reactor's output.
0 kommentar(er)
